pressing instructions

DTF Transfers: Easier Than Ever To Apply

PLACE IT

PRESS IT

PEEL IT

Heat Press Temperature Guide

240°F (115°C) for 100% polyester fabrics
260°F (125°C) for poly/cotton blends
280°F (140°C) for 100% cotton and similar materials

*Note: Optimal temperatures may vary between heat press models

Build a gang sheet

QUICK GUIDE

  1. Pre-press your garment for 5 seconds on the application side to eliminate moisture and wrinkles
  2. Position your DTF Transfer on the desired location and cover completely with a teflon sheet or parchment paper
  3. Apply medium pressure for 10 seconds
  4. Remove the backing film immediately (hot peel).
  5. Place teflon/parchment paper over the transferred design and press again for 5-6 seconds to seal
Shop dtf transfers

CARE TIPS

  1. Turn garment inside out before washing Wash in cold water only 2.
  2. Use mild detergent without bleach, whiteners, brighteners, OxiClean, or fabric softeners
  3. Tumble dry on low heat setting or hang to air dry
  4. Avoid ironing directly over the printed design

Need help? Contact our team for assistance.

CONTACT US